Parallel ADAPTER Cards

SensAble Phantom Desktop and Phantom Premium devices require full EPP mode. The following Axxon Parallel adapter cards provide the appropriate level of quality EPP communications required for the SensAble haptic devices. We also recommend that you check with Axxon to see if a particular card is compatible with your computer.

Operating System Revision 12 Phantom Device* Older Phantom Device (< Rev. 12)
Windows XP 32-bit

LF534KB (PCI);

LF811KB rev.G (PCI-e);

LF769KB (PCI-e);

LF616KB rev. B (PCI)

LF534KB (PCI);

LF616KB rev. B (PCI)
Windows XP 64-bit

LF534KB (PCI);

LF811KB rev.G (PCI-e);

LF769KB (PCI-e);

LF616KB rev. B (PCI)

LF534KB (PCI);

LF616KB rev. B (PCI)
Windows 7 32-bit

LF811KB rev.G (PCI-e);

LF769KB (PCI-e);

LF616KB rev. B (PCI)

LF616KB rev. B (PCI)
Windows 7 64-bit

LF811KB rev.G (PCI-e);

LF769KB (PCI-e);

LF616KB rev. B (PCI)

LF616KB rev. B (PCI)
Windows Vista 32-bit

LF811KB rev.G (PCI-e);

LF769KB (PCI-e);

  
Windows Vista 64-bit

LF811KB rev.G (PCI-e);

LF769KB (PCI-e);

  

Note:

1. To learn how to check the revision of your Phantom device, click here for instructions. A Phantom Desktop device is revision 12 if its serial number is greater than 4061001.

2. The above cards are compatible with desktop workstations. PCI means PCI/PCI-X card; PCI-e means PCI Express card.

3. Here is a link to Axxon website: http://softio.com/

4. If a solution cannot be found for your computer configuration, you might want to contact SensAble support to see if there are any other cards under testing.